1.54" 200x200 SPI E-Ink Display Module

1.54" 200x200 SPI E-Ink Display Module

The 1.54" 200x200 SPI E-Ink Display Module is an E-Ink display module featuring a 1.54-inch screen, 200x200 resolution, a built-in controller, SPI communication, and support for partial refresh.

Thanks to advantages such as ultra-low power consumption, a wide viewing angle, and the ability to display clear images without requiring continuous power, it is an ideal choice for applications like shelf labels, industrial devices, and more.

Wiki Page

Features

• SKU: 12955
• No backlight required; retains the last displayed content for a long time even when power is cut
• Ultra-low power consumption; power is primarily required only during the screen refresh process
• Compatible with Raspberry Pi, Arduino, Nucleo, etc. SPI interface for connection to control boards
• Onboard voltage translator compatible with 3.3V/5V MCUs
• Comes with development resources and a user manual (includes examples for Raspberry Pi, Jetson Nano, Arduino, and STM32)

Technical Specifications

• Operating voltage: 3.3V/5V
• Interface: 3-wire SPI, 4-wire SPI
• External dimensions: 48mm × 33mm
• Display size: 27.6mm × 27.6mm
• Dot pitch: 0.138 × 0.138
• Resolution: 200 × 200
• Display color: Black, white
• Gray scale: 2
• Partial refresh time: 0.3s
• Full refresh time: 2s
• Refresh power: 26.4mW (typical)
• Standby power: <0.017mW
• Viewing angle: >170°

Pinout

• VCC: 3.3V/5V
• GND: Ground (GND)
• DIN: SPI MOSI pin
• CLK: SPI SCK pin
• CS: SPI chip select, active low
• DC: Data/Command selection (high for data, low for command)
• RST: External reset, active low
• BUSY: Busy status output, active-high

Package Contents

• 1.54-inch E-Ink x1
• PH2.0 20 cm 8-Pin x1

Dimensions