Heat Shrinkable Tubing 20mm - 1 Meter

Heat Shrink Tubing 20mm - 1 Meter

It is a high-quality, flexible, easy-to-use general-purpose heat shrink 20mm tubing. 1 meter is sent. It is black in color.

What is Heat Shrink Tubing?

Heat shrink tubing is a type of extruded plastic tubing that can be cut to size and attached to a wire or cable joint to protect and insulate the connection. When heated, the pipe shrinks, permanently providing a protective seal. The amount it will shrink depends on the heat rate.

How to use Heat Shrink Tubing?

The diameter of the wire or cable is measured and the correct size of heat shrink tubing is selected. A piece of the pipe is cut so that it is long enough to cover the joint or joint after heating. This then slides onto the wire. After the cable or wire joins, the piece of heat shrinkable tubing moves over the joint and is heated until it shrinks and forms a tight wrap around the joint.

Uses

• Electrical insulation Environmental
• protection against moisture, dust and chemicals.
• Mechanical protection against abrasion to wires and small parts
• Mechanical strain relief at cable and connector connection points to prevent damage from bending or twisting
• Rigging and organizing harness cables, cables, and conduits
• Color-coded identifications of cables, wires, and components