IR Led Module for Raspberry Pi Camera (Dual)

CSI NoIR is an Infrared LED Module for camera compatible Raspberry Pi 3 and Raspberry Pi Zero (v1.3). It gets its lighting power (5V) from the CSI connector of the Raspberry Pi. The photoresistor next to the LED automatically turns the LED on when the brightness drops.

Due to the limit of Raspberry Pi power, it will work well in the range of 1-2m. If the distance is too far, the effect will not be very good.

NOTE: 2 Pieces are sent. Raspberry Pi and Camera are not included.

Technical Specifications

3W high power 850 infrared LED.
Built-in photoresistor, ambient light sensor.
Built-in tunable resistor to control ambient light threshold surrounding infrared LED.
Night vision to RPi Camera (E) or RPi Camera (F) It allows adding the function.

How to use

Connect the infrared LED board to the camera PCB with screw
Screw holes are used for both connection and power supply
Adjust the adjustable resistor to set a suitable ambient light threshold that automatically switches the infrared LED lower than the ambient light threshold , the infrared LED turns on

IR Led Module (Dual) for Raspberry Pi Camera

IR Led Module for Raspberry Pi Camera (Dual)

Technical Specifications

How to use