LD-FK-2.4G 12-24V Wireless Touch-Sensitive Cabinet Lighting Sensor

LD-FK-2.4G 12-24V Wireless Touch-Sensitive Cabinet Lighting Sensor

The LD-FK-2.4G 12-24V Wireless Touch-Sensitive Cabinet Lighting Sensor is designed to turn LED lighting on or off and adjust its brightness via a rechargeable touch-sensitive controller, eliminating the need for wired connections.

Since the system utilizes 2.4G wireless communication between the sensor unit and the receiver connected to the LED circuit, there is no need to run a separate control cable from the sensor to the LED driver. Equipped with a rechargeable lithium battery, the sensor can be conveniently mounted onto a cabinet door or the cabinet frame itself.

Touching the surface of the touch-sensitive sensor for less than 0.5 seconds will turn the connected LED lighting on or off.

When pressed and held for longer than 0.5 seconds, the brightness can be adjusted between 10% and 100%.

Note: The sensor communicates wirelessly via its own dedicated receiver.

Specifications

• Supply Voltage: 12–24V DC
• Wireless Communication: 2.4G RF
• Control Range: 10m
• Control Mode: Single Door
• Protection Class: IP20
• Equipped with a rechargeable lithium battery
• Load: 12V 60W / 24V 100W
• Sensor Supply: 5V
• Charging Interface: Type-C