TDA7498E 2x160W Dual Channel Stereo Digital Amplifier Circuit

High power amplifier circuit with TDA7498E integrated. It is an amplifier that you can use as 2x160w stereo or as a single channel with up to 220w mono power rating. It has an aluminum cooling block and a cooling fan in the middle.

Technical Specifications:

Supply Voltage: DC 15-36V ( It is recommended to use a High Amperage source.)
Cooler supported
Works with impedances between 4 and 8 ohms.
Volume adjustment with potentiometer
RCA audio input
3 Pin audio input (cable not included)
Amplification can be adjusted in 4 different ways with a two-stage dip switch. (see image for description)
Thermal protection against overheating
Protection against very high currents (short circuit)
LED on the power connector, indicating the status of the amplifier (on / off)
2x160W @ 36V 10A (4 Ohm)
1x220W @ 36V 7A (3 Ohm)
1x100W @ 24V 6A (3 Ohm)
1x100W @ 24V 6A (3 Ohm)
2x50W @ 22V 5A (4 Ohm)
2x25W @ 15V 4A (4 Ohm)
1x 220W mono can be modified (see image 3 for where to solder together see picture 4 for J1, J2, J3 and J4 Subwoofer input and output)
Dimensions: 109mm x 79mm x 23mm