USB Male to 5-Pin Terminal Converter / USB 2.0 to 5-Pin Terminal

USB-A Male Socket - 5-Pin Terminal Block. If you need to connect to a device with a USB Jack, you can make your own usb connection using your own USB host connector, extension cable or special type of cable. It does not require soldering. Use a small screwdriver to pry open the terminal blocks, slide in your stranded or solid wire and tighten again.

The terminal block itself can be removed from the housing. It is more durable than soldering wires to a connector and all pins are labeled. There are S, +, D-, D+, - pins. Dimensions: 52.0mm x 19.0mm x 11.4mm / 2.0" x 0.7" x 0.4"