.png)
0
Comment
12V 3A Touch-Activated LED Sensor for River Tables
110,00
TL
+
VAT
132,00
TL
Notify Me When It Arrives
110,00
TL
+
VAT
132,00
TL
Add to Favorite
RecommendCommentAlarm Price
12V 3A Touch-Activated LED Sensor for River Tables
The 12V 3A Touch-Activated LED Sensor for River Tables consists of a ring-shaped sensor and an LED control board that enables the control of decorative LED lighting via touch through materials such as wood, acrylic, resin, and similar surfaces.
The sensor area can detect touch through insulating surfaces up to approximately 1.5 cm thick; detection sensitivity increases as the surface thickness decreases. Its circular design creates a wide detection zone beneath the table or decorative surface. It can be concealed behind materials such as wood, Plexiglass, acrylic, epoxy resin, stone, plastic, and cardboard.
The module operates in synchronous mode by default. The product also supports synchronous and "hold" operation options.
During standard operation, when a touch is detected, the output may remain active for approximately 10–15 seconds, and the output is deactivated approximately 0.5 seconds after the touch ends.Specifications
- Nominal Operating Voltage: 12V DC
- Input Range: 11.5–12.5V DC
- Maximum Operating Current: 3A
- Approximate Maximum Load Power: 36W @ 12V
- Detection Type: Capacitive touch
- Detection Thickness: Up to approximately 1.5 cm
- Sensitivity: Increases as the surface thickness decreases
SIMILAR PRODUCTS
17,50
TL
+
VAT
100,00
TL
+
VAT
37,50
TL
+
VAT
35,00
TL
+
VAT
175,00
TL
+
VAT
22,50
TL
+
VAT
87,50
TL
+
VAT
45,00
TL
+
VAT
75,00
TL
+
VAT
150,00
TL
+
VAT
162,50
TL
+
VAT
