.png)
CAN FD to ETH/RS232/RS485 Bidirectional Protocol Converter
CAN FD to ETH/RS232/RS485 Bidirectional Protocol Converter
The CAN FD to ETH/RS232/RS485 Bidirectional Protocol Converter is a DIN-rail mountable device that offers high speed, low latency, stable performance, ease of use, and cost-effectiveness. It supports five distinct data conversion modes: transparent conversion, transparent conversion with ID information, standard protocol conversion, Modbus protocol conversion, and custom protocol conversion. Compatible with both CAN FD and CAN 2.0A/2.0B protocols, it facilitates connectivity between CAN networks and devices linked via Ethernet or serial ports.
Featuring an industrial-grade design, it ensures stable operation within a temperature range of -40°C to 85°C and supports a wide power input range of 9V to 36V. It accommodates CAN FD arbitration domain baud rates from 5 Kbps to 1 Mbps, and CAN FD data domain baud rates from 100 Kbps to 5 Mbps. The device supports parameter configuration via a host computer, includes internal 120Ω termination resistors (toggleable via DIP switches), and is designed for DIN-rail mounting.
easy to configure and install.
Features
- SKU: 32600
| Classification | Parameter | Value |
|---|---|---|
| Basic parameters | Working voltage | DC 9V ~ 36V |
| Size | 110 × 27 × 85.6 (mm) | |
| Installation | DIN-rail installation | |
| Reload button | Long press to restore factory settings | |
| Indicator light | POWER, WORK, COM, CAN | |
| Interface parameters | CAN port specification | 1-ch CAN port, supports CAN FD, compatible with CAN 2.0A/2.0B |
| CAN port baud rate | Arbitration domain baud rate: 5Kbps ~ 1Mbps Data domain baud rate: 100Kbps ~ 5Mbps | |
| Terminal resistor | Built-in 2 × 120Ω terminal resistors Switching either DIP switch to ON connects one 120 Ω resistor in parallel | |
| Network port specification | RJ45, 10/100Mbps, cross-connection adaptive | |
| Serial port specification | Supports 1-ch RS485 or RS232 | |
| Working Environment | Working temperature | -40℃ ~ 85℃ |
| Storage temperature | -40℃ ~ 105℃ | |
| Working humidity | 5% ～ 95% RH (no condensation) | |
| Storage humidity | 5% ～ 95% RH (no condensation) | |
| Software function | Networking protocol | TCP server, TCP client, UDP server, UDP client (only network port) |
| Modbus gateway | Network port: CAN FD to Modbus TCP (Master/Slave) Serial port: CAN FD To Modbus RTU (Master/Slave) | |
| Send message | Supports configuring up to 64 transmission messages | |
| Receive message | Supports configuring up to 64 receiving messages | |
| Protocol conversion | Transparent conversion, transparent conversion with ID, standard protocol conversion, Modbus protocol conversion, and custom protocol conversion | |
| CAN ID | Supports standard frame and extended frame | |
| Frame ID filtering | Supports only standard frames, only extended frames, and custom input frame ID (up to 32 groups) | |
| Pack frame time | Supports customizing the number of frames and the time of frame packing (Network port) | |
| Change direction | Supports bidirectional conversion, only serial / network port to CAN, and only CAN to serial / network port | |
| Firmware upgrade | Supports the host computer for firmware upgrade | |
| Parameter configuration | AT command and host computer software configuration | |
| Other features | Supports heartbeat packets; register packets; normal, loopback, and only listen modes (Network port) | |
| Protection parameters | ESD protection | Air discharge: 8 KV, Contact discharge: 6 KV |
| Eft/Burst | Power circuit: 2KV; RS485/RS232 circuit: 1KV; Network port & CAN port circuit: 1KV | |
| Surge immunity test | Power circuit: 1kV differential mode, 2kV common mode; CAN circuit: 2KV common mode; Serial port & Network port circuit: 2kV common mode |
Package Content
- CAN FD ETH RS232/RS485 Converter x1
- Barrel jack with terminal input x1
- Screwdriver x1
Interface
Size
