CC1101 Wireless Module

CC1101 external wireless antenna module is suitable for Arduino projects and other microprocessor projects.

1.2K baud CC1101 module consists of a domestic R&Lotes unit to improve the effective communication distance. It allows one to adjust the rate of bits for different uses, resulting in a higher transmission rate. 2-Supports FSK, GFSK and MSK modulations. It also has a high sensitivity (1.2kbps @ -110 dBm, 1% data error rate).

Includes CRC error detection system and has low power consumption.

Specifications:

Power supply: 1.8-3.6 VDC
Operating frequency: 387-464 MHz
Low consumption current (RX mode, 15.6mA, 2.4Kbps, 433MHz)
Minimum operating speed: 1.2 kbps
Minimum operating speed: 500 kbps
Minimum operating speed: 500 kbps
Improving the power phase noise of the adjacent channel, better and closer (ACP) performance
Higher input saturation level
Highest power performance
Allows you to set the bit rate for different uses with a higher transmission rate
Supports Modulation 2-FSK, GFSK, MSK
CRC error detection and control of communication direction
Programmable output power for all frequencies, up to +10dBm
Wireless function wakes up
Supports function activated by low power electromagnetic waves
Automatic before transmission Supports CCA cleaning
Operator monitoring system
Fast frequency change synthesizer for accurate frequency hopping system
High sensitivity (1.2Kbps@-110dBm, 1% error)
Wide continuous frequency band: CC1101: 387-464 MHz and 779-928 MHz
Individual data 64 bytes RX and TX FIFO
Size: 50 × 27x9 mm