.png)
0
Comment
DIY Automatic Watering Kit
264,00
TL
+
VAT
316,80
TL
Notify Me When It Arrives
Notify Me When It Arrives
DIY Automatic Watering Kit
With the soil moisture detection sensor, you can measure the humidity rate and water the vegetable garden and pot automatically. You can change the irrigation device according to the humidity, the sensitivity can be adjusted by potentiometer. This kit requires no programming or microcontroller. You can use 5V DC or 4 AA batteries as a power source.
Box Content
- 1 x Relay module
- 1 x Soil moisture probe + module
- 1 x Small water pump
- 1 x Battery box
- 1 x USB power cable
- 1 x Silicone hose
- 10 x DuPont line
Wiring Diagram
Note:
- Do not pour water directly on the sensor. The moisture of the water will corrode the sensor.
- There is no soldering required for this kit, but you will need to twist the copper wires together and protect them with black tape.
- The pump cannot operate in air for a long time.
SIMILAR PRODUCTS
44,00
TL
+
VAT
