RepRap Ramps 1.4 Compatible 128x64 Graphic GLCD Display Kit - Full Graphic Smart

 

Full graphics Smart Controller, SD Card reader, potentiometer and 128 x 64  Includes LCD screen. You can easily connect it to your RAMPS 1.4 card using the included "smart adapter". Once you connect this panel to your RAMPS, you do not need your PC to control your 3D Printer. All actions such as calibration, axis movements can be done only by using the potentiometer on the Smart Controller. Print your 3D designs without a PC, just with a g-code file stored on the SD card.

Learn more about Full Graphic LCD Smart Controller Full You can find it on the Graphics Smart Controller WIKI page.

 

Technical Specifications

< UL>

Large screen 128x64 LCD (3.2")

SD card slot on the back, can directly select a file and print

The product comes encoder parameter setting can be achieved and file selection print

LI>

Plug and Play on RAMPS, but you need to modify the firmware to support it.

LCD 12864 Smart Controller is fully supported by Marlin Firmware.

< DIV>1 x LCD Graphics controller

1 x Connection adapter

2 x Connection cable