0.2 mL Silver Conductive Paint - PCB Circuit Repair Adhesive

A silver conductive adhesive/paste for electronic repair applications, contained in a small syringe. Once dry, it is highly conductive and comes out of the syringe as a paste-like substance. Suitable for use to repair broken boards or create smooth jumpers on PCB board. Can be used for repair of membrane switches. Perfect for both hard and flexible surfaces.

Used in household appliances, electrical appliances, computer CPU, LED displays, LCD displays, fiber optic communication equipment, controller-cooler and is widely used in LED.

How to use:

1. Apply where you need it. (Degrease the place if necessary)

2. Once the desired marks are covered, allow it to cure for one to two hours. More time may be required in cold weather.

3. If you want it to dry quickly, blow it with a hot heat gun or air dryer for 5-10 minutes.

Store in a cool, dark place (<23*C) and out of direct sunlight. Avoid.

Specifications

Length: approx. 15.5 cm
Capacity: 0.2ML
Solid content WT%: 66
Viscosity balance: 260±50
Pencil hardness H: >3