External GPS Antenna - 3m Cable

GPS Antenna is designed for applications requiring high positioning accuracy by combining signals from GPS systems. The small size of this antenna allows it to be used in environments with very space constraints. With the 3 meter cable, you can use this antenna to enhance GPS Signals in an indoor project with Raspberry Pi HAT or Arduino Shield. The antenna has a flat magnetic surface to hold it in place temporarily or can be permanently attached to any surface with the help of Double Sided Tape

Antenna Power supply to the preamplifier must be provided by the application on the same RF signal trace as the GNS RF signal is carried to the application.
Easy to use. No RF or antenna knowledge required

Technical Specifications

Operating Frequency: 1575.42 Mhz
LNA gain (wireless): 27dB
Typical noise value: 1.5dB
Operating Voltage Range: 3 ~ 5 VDC
Operating Current: 15mA
Connector: SMA-Male
Cable Length: 3 Meters
Dimensions: 50x38x17mm