ICM-20602 6 Axis 3.3-5V Acceleration and Gyro Sensor

ICM-20602 6 Axis 3.3-5V Acceleration and Gyro Sensor

ICM-20602 6 Axis 3.3-5V Acceleration and Gyro Sensor can reach 10M wave using ICM-20602 hardware SPl Special rate. Better than MPU, Noise is smaller than MPU.

Features

• Power supply: 3.3-5V (with LD0 voltage regulator chip)
• Communication method: Support I2C and SPl (10M bit rate)
• Gyroscope range: ±250 500 1000 2000° /s
• Acceleration range: ±2±4±8±16g
• Pin pitch: 2.54mm
• Product parameters: Chip built-in 16bit AD converter, 16
  data output

Pinout

• VCC --> 3.3-5V
• GND --> Ground
• SCL/SPC --> IIC Clock Pin
• SDA/SDI --> IIC Data Pin/Slave input pin
• SAO/SDO --> IIC address/SPI slave output
• CS --> SPI chip Select
• INT --> Interrupt
• FSY --> Synchronize